#
msgid ""
msgstr ""
-"Project-Id-Version: gnome-shell 2.91.6\n"
+"Project-Id-Version: gnome-shell 2.91.91\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-02-04 13:12+0800\n"
-"PO-Revision-Date: 2011-02-04 13:12+0800\n"
+"POT-Creation-Date: 2011-03-22 19:42+0800\n"
+"PO-Revision-Date: 2011-03-22 19:42+0800\n"
"Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
"Language-Team: Chinese (Hong Kong) <community@linuxhall.org>\n"
"Language: \n"
msgstr "指令 (Alt-F2) 對話盒歷史紀錄"
#: ../data/org.gnome.shell.gschema.xml.in.h:7
+#, fuzzy
+msgid "History for the looking glass dialog"
+msgstr "指令 (Alt-F2) 對話盒歷史紀錄"
+
+#: ../data/org.gnome.shell.gschema.xml.in.h:8
msgid "If true, display date in the clock, in addition to time."
msgstr "如設定為「true」，除了在時鐘內顯示日期外還顯示時刻。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:8
+#: ../data/org.gnome.shell.gschema.xml.in.h:9
msgid "If true, display seconds in time."
msgstr "如設定為「true」，在時刻中顯示秒數。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:9
+#: ../data/org.gnome.shell.gschema.xml.in.h:10
msgid "If true, display the ISO week date in the calendar."
msgstr "如果設為 true，在日曆中顯示 ISO 週數。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:10
+#: ../data/org.gnome.shell.gschema.xml.in.h:11
msgid "List of desktop file IDs for favorite applications"
msgstr "喜好的應用程式桌面檔案 ID 清單"
-#: ../data/org.gnome.shell.gschema.xml.in.h:12
+#: ../data/org.gnome.shell.gschema.xml.in.h:13
#, no-c-format
msgid ""
"Sets the GStreamer pipeline used to encode recordings. It follows the syntax "
"at the optimal thread count on the system."
msgstr "設定用來錄製的 GStreamer 管線。它根據據 gst-launch 使用的語法。管線應該要有未連接的出口(sink pad)，提供錄製視像之用。它通常會有未連接的入口(source pad)；從出口輸出的資訊就寫入輸出檔案。然而管線本身也會處理它本身的輸出 - 習慣上是透過 shout2send 之類將輸出傳送到 icecast 伺服器。當取消設定或設定為空值時，就會使用預設的管線。這個值目前為 'videorate ! vp8enc quality=10 speed=2 threads=%T ! queue ! webmmux' 即使用 VP8 codec 錄製 WEBM。%T 是在系統的最佳化執行緒計數猜測時使用的佔位符。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:13
+#: ../data/org.gnome.shell.gschema.xml.in.h:14
msgid "Show date in clock"
msgstr "在時鐘內顯示日期"
-#: ../data/org.gnome.shell.gschema.xml.in.h:14
+#: ../data/org.gnome.shell.gschema.xml.in.h:15
msgid "Show the week date in the calendar"
msgstr "在日曆中顯示週數"
-#: ../data/org.gnome.shell.gschema.xml.in.h:15
+#: ../data/org.gnome.shell.gschema.xml.in.h:16
msgid "Show time with seconds"
msgstr "在時刻中顯示秒數"
-#: ../data/org.gnome.shell.gschema.xml.in.h:16
+#: ../data/org.gnome.shell.gschema.xml.in.h:17
msgid ""
"The applications corresponding to these identifiers will be displayed in the "
"favorites area."
msgstr "對應這些辨別碼的應用程式會顯示在喜好區域。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:17
+#: ../data/org.gnome.shell.gschema.xml.in.h:18
msgid ""
"The filename for recorded screencasts will be a unique filename based on the "
"current date, and use this extension. It should be changed when recording to "
"a different container format."
msgstr "錄製好的畫面廣播檔案名稱會以目前的時刻作為獨特的檔名，並使用這個延伸檔名。當錄製為不同的容器格式時應該做適當更改。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:18
+#: ../data/org.gnome.shell.gschema.xml.in.h:19
msgid ""
"The framerate of the resulting screencast recordered by GNOME Shell's "
"screencast recorder in frames-per-second."
msgstr "由 GNOME Shell 的畫面廣播錄製程式所錄製成果的框架率，以 frames-per-second 計。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:19
+#: ../data/org.gnome.shell.gschema.xml.in.h:20
msgid "The gstreamer pipeline used to encode the screencast"
msgstr "用來編碼畫面廣播的 gstreamer 管線"
-#: ../data/org.gnome.shell.gschema.xml.in.h:20
+#: ../data/org.gnome.shell.gschema.xml.in.h:21
msgid ""
"The shell normally monitors active applications in order to present the most "
"used ones (e.g. in launchers). While this data will be kept private, you may "
"remove already saved data."
msgstr "這個 shell 通常會監控使用中的應用程式以便能顯示出最常使用的（例如，在程式執行器中）。雖然這個資料會保持隱密，但是你可能會基於私隱的理由想要停用這個功能。請注意這麼做並不會移除已儲存的資料。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:21
+#: ../data/org.gnome.shell.gschema.xml.in.h:22
msgid "Uuids of extensions to disable"
msgstr "要停用的延伸檔名 Uuid"
-#: ../data/org.gnome.shell.gschema.xml.in.h:22
+#: ../data/org.gnome.shell.gschema.xml.in.h:23
msgid "Whether to collect stats about applications usage"
msgstr "是否收集關於應用程式使用率的狀態"
-#: ../data/org.gnome.shell.gschema.xml.in.h:23
+#: ../data/org.gnome.shell.gschema.xml.in.h:24
msgid "disabled OpenSearch providers"
msgstr "已停用 OpenSearch 提供者"
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:1
-msgid "Clip the crosshairs at the center"
-msgstr "點選中央的十字準星"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:2
-msgid "Color of the crosshairs"
-msgstr "十字準星的顏色"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:3
-msgid ""
-"Determines the length of the vertical and horizontal lines that make up the "
-"crosshairs."
-msgstr "決定組成十字準星的垂直和水平線條的長度。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:4
-msgid ""
-"Determines the position of the magnified mouse image within the magnified "
-"view and how it reacts to system mouse movement. The values are - none: no "
-"mouse tracking; - centered: the mouse image is displayed at the center of "
-"the zoom region (which also represents the point under the system mouse) and "
-"the magnified contents are scrolled as the system mouse moves; - "
-"proportional: the position of the magnified mouse in the zoom region is "
-"proportionally the same as the position of the system mouse on screen; - "
-"push: when the magnified mouse intersects a boundary of the zoom region, the "
-"contents are scrolled into view."
-msgstr "決定放大的滑鼠圖片在放大鏡檢 視中的位置以及它如何反應系統滑鼠的移動。數值有 - none: 不追蹤滑鼠；- centered: 滑鼠圖片顯示於放大區域的中央（也代表系統滑鼠下方的點）而放大的內容也會隨系統滑鼠移動而捲動；- proportional: 放大的滑鼠在縮放區域中的位置和系統滑鼠在螢幕中的位置是成比例的；- push: 當放大的滑鼠與縮放區域邊界交錯時，內容會捲動到檢視中。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:5
-msgid ""
-"Determines the transparency of the crosshairs, from fully opaque to fully "
-"transparent."
-msgstr "決定十字準星的透明度，從完全不透明到完全透明。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:6
-msgid ""
-"Determines whether the crosshairs intersect the magnified mouse sprite, or "
-"are clipped such that the ends of the horizontal and vertical lines surround "
-"the mouse image."
-msgstr ""
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:7
-msgid "Enable lens mode"
-msgstr "啟用鏡頭模式"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:8
-msgid ""
-"Enables/disables display of crosshairs centered on the magnified mouse "
-"sprite."
-msgstr ""
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:9
-msgid ""
-"For centered mouse tracking, when the system pointer is at or near the edge "
-"of the screen, the magnified contents continue to scroll such that the "
-"screen edge moves into the magnified view."
-msgstr "對於置中式的滑鼠追蹤，當系統指標位於或接近螢幕的邊緣時，放大的內容也會持續捲動，讓螢幕的邊緣移進放大的檢視範圍。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:10
-msgid "Length of the crosshairs"
-msgstr "十字準星長度"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:11
-msgid "Magnification factor"
-msgstr "放大率"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:12
-msgid "Mouse Tracking Mode"
-msgstr "滑鼠追蹤模式"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:13
-msgid "Opacity of the crosshairs"
-msgstr "十字準星透明度"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:14
-msgid "Screen position"
-msgstr "螢幕位置"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:15
-msgid "Scroll magnified contents beyond the edges of the desktop"
-msgstr "在桌面邊緣時捲動放大的內容"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:16
-msgid "Show or hide crosshairs"
-msgstr "顯示或隱藏十字準星"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:17
-msgid "Show or hide the magnifier"
-msgstr "顯示或隱藏放大鏡"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:18
-msgid "Show or hide the magnifier and all of its zoom regions."
-msgstr "顯示或隱藏放大鏡和所有被它放大的區域。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:19
-msgid ""
-"The color of the the vertical and horizontal lines that make up the "
-"crosshairs."
-msgstr "組成十字準星的垂直和水平線條的顏色。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:20
-msgid ""
-"The magnified view either fills the entire screen, or occupies the top-half, "
-"bottom-half, left-half, or right-half of the screen."
-msgstr "放大的檢視要佔據整個螢幕，或是只佔螢幕的上半、下半、左半或右半邊。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:21
-msgid ""
-"The power of the magnification. A value of 1.0 means no magnification. A "
-"value of 2.0 doubles the size."
-msgstr "放大的倍數。數值 1.0 表示不放大。數值 2.0 為放大兩倍。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:22
-msgid "Thickness of the crosshairs"
-msgstr "十字準星厚度"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:23
-msgid ""
-"Whether the magnified view should be centered over the location of the "
-"system mouse and move with it."
-msgstr "放大的檢視是否應以系統滑鼠的位置為中心點並隨滑鼠移動。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:24
-msgid "Width of the vertical and horizontal lines that make up the crosshairs."
-msgstr "組成十字準星的垂直和水平線條的闊度。"
-
-#: ../js/misc/util.js:86
+#: ../js/misc/util.js:71
msgid "Command not found"
msgstr "找不到指令"
#. Replace "Error invoking GLib.shell_parse_argv: " with
#. something nicer
-#: ../js/misc/util.js:113
+#: ../js/misc/util.js:98
msgid "Could not parse command:"
msgstr "無法分析指令："
-#: ../js/misc/util.js:135
-msgid "No such application"
-msgstr "沒有這個應用程式"
-
-#: ../js/misc/util.js:148
+#: ../js/misc/util.js:106
#, c-format
msgid "Execution of '%s' failed:"
msgstr "執行「%s」失敗："
#. Translators: Filter to display all applications
-#: ../js/ui/appDisplay.js:164
+#: ../js/ui/appDisplay.js:230
msgid "All"
msgstr "全部"
-#: ../js/ui/appDisplay.js:245
+#: ../js/ui/appDisplay.js:328
msgid "APPLICATIONS"
msgstr "程式集"
-#: ../js/ui/appDisplay.js:275
-msgid "PREFERENCES"
-msgstr "偏好設定"
+#: ../js/ui/appDisplay.js:354
+msgid "SETTINGS"
+msgstr "設定值"
-#: ../js/ui/appDisplay.js:572
+#: ../js/ui/appDisplay.js:620
msgid "New Window"
msgstr "新視窗"
-#: ../js/ui/appDisplay.js:576
+#: ../js/ui/appDisplay.js:623
msgid "Remove from Favorites"
msgstr "自喜好中移除"
-#: ../js/ui/appDisplay.js:577
+#: ../js/ui/appDisplay.js:624
msgid "Add to Favorites"
msgstr "加入喜好"
#. Translators: Shown in calendar event list for all day events
#. * Keep it short, best if you can use less then 10 characters
#.
-#: ../js/ui/calendar.js:65
-#, fuzzy
-#| msgid "All Day"
+#: ../js/ui/calendar.js:66
msgctxt "event list time"
msgid "All Day"
msgstr "整天"
#. Translators: Shown in calendar event list, if 24h format
-#: ../js/ui/calendar.js:70
+#: ../js/ui/calendar.js:71
msgctxt "event list time"
msgid "%H:%M"
-msgstr ""
+msgstr "%H:%M"
#. Transators: Shown in calendar event list, if 12h format
-#: ../js/ui/calendar.js:77
-#, fuzzy
-#| msgid "%a %l:%M %p"
+#: ../js/ui/calendar.js:78
msgctxt "event list time"
msgid "%l:%M %p"
-msgstr "%a %p %l:%M"
+msgstr "%p %l:%M"
#. Translators: Calendar grid abbreviation for Sunday.
#. *
#. * NOTE: These grid abbreviations are always shown together
#. * and in order, e.g. "S M T W T F S".
#.
-#: ../js/ui/calendar.js:117
-#, fuzzy
-#| msgid "S"
+#: ../js/ui/calendar.js:118
msgctxt "grid sunday"
msgid "S"
msgstr "日"
#. Translators: Calendar grid abbreviation for Monday
-#: ../js/ui/calendar.js:119
-#, fuzzy
-#| msgid "M"
+#: ../js/ui/calendar.js:120
msgctxt "grid monday"
msgid "M"
msgstr "一"
#. Translators: Calendar grid abbreviation for Tuesday
-#: ../js/ui/calendar.js:121
-#, fuzzy
-#| msgid "T"
+#: ../js/ui/calendar.js:122
msgctxt "grid tuesday"
msgid "T"
msgstr "二"
#. Translators: Calendar grid abbreviation for Wednesday
-#: ../js/ui/calendar.js:123
-#, fuzzy
-#| msgid "W"
+#: ../js/ui/calendar.js:124
msgctxt "grid wednesday"
msgid "W"
msgstr "三"
#. Translators: Calendar grid abbreviation for Thursday
-#: ../js/ui/calendar.js:125
-#, fuzzy
-#| msgid "T"
+#: ../js/ui/calendar.js:126
msgctxt "grid thursday"
msgid "T"
-msgstr "二"
+msgstr "四"
#. Translators: Calendar grid abbreviation for Friday
-#: ../js/ui/calendar.js:127
-#, fuzzy
-#| msgid "F"
+#: ../js/ui/calendar.js:128
msgctxt "grid friday"
msgid "F"
msgstr "五"
#. Translators: Calendar grid abbreviation for Saturday
-#: ../js/ui/calendar.js:129
-#, fuzzy
-#| msgid "S"
+#: ../js/ui/calendar.js:130
msgctxt "grid saturday"
msgid "S"
-msgstr "日"
+msgstr "六"
#. Translators: Event list abbreviation for Sunday.
#. *
#. * so they need to be unique (e.g. Tuesday and Thursday cannot
#. * both be 'T').
#.
-#: ../js/ui/calendar.js:142
-#, fuzzy
-#| msgid "Su"
+#: ../js/ui/calendar.js:143
msgctxt "list sunday"
msgid "Su"
msgstr "日"
#. Translators: Event list abbreviation for Monday
-#: ../js/ui/calendar.js:144
-#, fuzzy
-#| msgid "M"
+#: ../js/ui/calendar.js:145
msgctxt "list monday"
msgid "M"
msgstr "一"
#. Translators: Event list abbreviation for Tuesday
-#: ../js/ui/calendar.js:146
-#, fuzzy
-#| msgid "T"
+#: ../js/ui/calendar.js:147
msgctxt "list tuesday"
msgid "T"
msgstr "二"
#. Translators: Event list abbreviation for Wednesday
-#: ../js/ui/calendar.js:148
-#, fuzzy
-#| msgid "W"
+#: ../js/ui/calendar.js:149
msgctxt "list wednesday"
msgid "W"
msgstr "三"
#. Translators: Event list abbreviation for Thursday
-#: ../js/ui/calendar.js:150
-#, fuzzy
-#| msgid "Th"
+#: ../js/ui/calendar.js:151
msgctxt "list thursday"
msgid "Th"
msgstr "四"
#. Translators: Event list abbreviation for Friday
-#: ../js/ui/calendar.js:152
-#, fuzzy
-#| msgid "F"
+#: ../js/ui/calendar.js:153
msgctxt "list friday"
msgid "F"
msgstr "五"
#. Translators: Event list abbreviation for Saturday
-#: ../js/ui/calendar.js:154
-#, fuzzy
-#| msgid "S"
+#: ../js/ui/calendar.js:155
msgctxt "list saturday"
msgid "S"
-msgstr "日"
+msgstr "六"
#. Translators: Text to show if there are no events
-#: ../js/ui/calendar.js:701
+#: ../js/ui/calendar.js:704
msgid "Nothing Scheduled"
msgstr "沒有預訂行程"
#. Translators: Shown on calendar heading when selected day occurs on current year
-#: ../js/ui/calendar.js:717
-#, fuzzy
-#| msgid "%A %B %e, %Y"
+#: ../js/ui/calendar.js:720
msgctxt "calendar heading"
msgid "%A, %B %d"
-msgstr "%Y %B %e %A"
+msgstr "%B%d日%A"
#. Translators: Shown on calendar heading when selected day occurs on different year
-#: ../js/ui/calendar.js:720
-#, fuzzy
-#| msgid "%A %B %e, %Y"
+#: ../js/ui/calendar.js:723
msgctxt "calendar heading"
msgid "%A, %B %d, %Y"
-msgstr "%Y %B %e %A"
+msgstr "%Y年%B%d日%A"
-#: ../js/ui/calendar.js:730
+#: ../js/ui/calendar.js:733
msgid "Today"
msgstr "今天"
-#: ../js/ui/calendar.js:734
+#: ../js/ui/calendar.js:737
msgid "Tomorrow"
msgstr "明天"
-#: ../js/ui/calendar.js:743
+#: ../js/ui/calendar.js:746
msgid "This week"
msgstr "本週"
-#: ../js/ui/calendar.js:751
+#: ../js/ui/calendar.js:754
msgid "Next week"
msgstr "下週"
-#: ../js/ui/dash.js:27
+#: ../js/ui/dash.js:174 ../js/ui/messageTray.js:945
msgid "Remove"
msgstr "移除"
msgid "Date and Time Settings"
msgstr "日期與時刻設定值"
-#: ../js/ui/dateMenu.js:110
+#: ../js/ui/dateMenu.js:111
msgid "Open Calendar"
msgstr "開啟行事曆"
#. Translators: This is the time format with date used
#. in 24-hour mode.
-#: ../js/ui/dateMenu.js:149
+#: ../js/ui/dateMenu.js:164
msgid "%a %b %e, %R:%S"
msgstr "%b %e %a, %R:%S"
-#: ../js/ui/dateMenu.js:150
+#: ../js/ui/dateMenu.js:165
msgid "%a %b %e, %R"
msgstr "%b %e %a, %R"
#. Translators: This is the time format without date used
#. in 24-hour mode.
-#: ../js/ui/dateMenu.js:154
+#: ../js/ui/dateMenu.js:169
msgid "%a %R:%S"
msgstr "%a %R:%S"
-#: ../js/ui/dateMenu.js:155
+#: ../js/ui/dateMenu.js:170
msgid "%a %R"
msgstr "%a %R"
#. Translators: This is a time format with date used
#. for AM/PM.
-#: ../js/ui/dateMenu.js:162
+#: ../js/ui/dateMenu.js:177
msgid "%a %b %e, %l:%M:%S %p"
msgstr "%b %e %a, %p %l:%M:%S"
-#: ../js/ui/dateMenu.js:163
+#: ../js/ui/dateMenu.js:178
msgid "%a %b %e, %l:%M %p"
msgstr "%b %e %a, %p %l:%M"
#. Translators: This is a time format without date used
#. for AM/PM.
-#: ../js/ui/dateMenu.js:167
+#: ../js/ui/dateMenu.js:182
msgid "%a %l:%M:%S %p"
msgstr "%a %p %l:%M:%S"
-#: ../js/ui/dateMenu.js:168
+#: ../js/ui/dateMenu.js:183
msgid "%a %l:%M %p"
msgstr "%a %p %l:%M"
msgid "%A %B %e, %Y"
msgstr "%Y %B %e %A"
-#: ../js/ui/docDisplay.js:18
+#: ../js/ui/docDisplay.js:19
msgid "RECENT ITEMS"
msgstr "最近使用項目"
msgid "Confirm"
msgstr "確認"
-#: ../js/ui/endSessionDialog.js:400 ../js/ui/status/bluetooth.js:470
+#: ../js/ui/endSessionDialog.js:400 ../js/ui/status/bluetooth.js:466
msgid "Cancel"
msgstr "取消"
-#: ../js/ui/lookingGlass.js:556
+#: ../js/ui/lookingGlass.js:588
msgid "No extensions installed"
msgstr "沒有安裝擴充功能"
-#: ../js/ui/lookingGlass.js:593
+#: ../js/ui/lookingGlass.js:625
msgid "Enabled"
msgstr "已啟用"
#. translators:
#. * The device has been disabled
-#: ../js/ui/lookingGlass.js:595 ../src/gvc/gvc-mixer-control.c:1087
+#: ../js/ui/lookingGlass.js:627 ../src/gvc/gvc-mixer-control.c:1091
msgid "Disabled"
msgstr "已停用"
-#: ../js/ui/lookingGlass.js:597
+#: ../js/ui/lookingGlass.js:629
msgid "Error"
msgstr "錯誤"
-#: ../js/ui/lookingGlass.js:599
+#: ../js/ui/lookingGlass.js:631
msgid "Out of date"
msgstr "過期"
-#: ../js/ui/lookingGlass.js:624
+#: ../js/ui/lookingGlass.js:656
msgid "View Source"
msgstr "檢示來源"
-#: ../js/ui/lookingGlass.js:630
+#: ../js/ui/lookingGlass.js:662
msgid "Web Page"
msgstr "網頁"
-#: ../js/ui/messageTray.js:1809
+#: ../js/ui/messageTray.js:938
+#, fuzzy
+msgid "Open"
+msgstr "開啟"
+
+#: ../js/ui/messageTray.js:2018
msgid "System Information"
msgstr "系統資訊"
-#: ../js/ui/overview.js:88
+#: ../js/ui/overview.js:89
msgid "Undo"
msgstr "復原"
-#: ../js/ui/overview.js:159
+#: ../js/ui/overview.js:184
msgid "Windows"
msgstr "視窗"
-#: ../js/ui/overview.js:162
+#: ../js/ui/overview.js:187
msgid "Applications"
msgstr "應用程式"
+#. Translators: this is the name of the dock/favorites area on
+#. the left of the overview
+#: ../js/ui/overview.js:203
+#, fuzzy
+msgid "Dash"
+msgstr "破折號"
+
#. TODO - _quit() doesn't really work on apps in state STARTING yet
-#: ../js/ui/panel.js:480
+#: ../js/ui/panel.js:515
#, c-format
msgid "Quit %s"
msgstr "結束 %s"
#. Button on the left side of the panel.
#. Translators: If there is no suitable word for "Activities" in your language, you can use the word for "Overview".
-#: ../js/ui/panel.js:614
+#: ../js/ui/panel.js:876
msgid "Activities"
msgstr "概覽 "
-#: ../js/ui/placeDisplay.js:106
+#: ../js/ui/panel.js:977
+msgid "Top Bar"
+msgstr "頂端列"
+
+#: ../js/ui/placeDisplay.js:122
#, c-format
msgid "Failed to unmount '%s'"
msgstr "無法卸載「%s」"
-#: ../js/ui/placeDisplay.js:109
+#: ../js/ui/placeDisplay.js:125
msgid "Retry"
msgstr "重試"
-#: ../js/ui/placeDisplay.js:150
+#: ../js/ui/placeDisplay.js:165
msgid "Connect to..."
msgstr "連接到…"
-#: ../js/ui/placeDisplay.js:386
+#: ../js/ui/placeDisplay.js:380
msgid "PLACES & DEVICES"
msgstr "位置 & 裝置"
#. "ON" and "OFF") or "toggle-switch-intl" (for toggle
#. switches containing "◯" and "|"). Other values will
#. simply result in invisible toggle switches.
-#: ../js/ui/popupMenu.js:33
+#: ../js/ui/popupMenu.js:636
msgid "toggle-switch-us"
msgstr "toggle-switch-us"
-#: ../js/ui/runDialog.js:209
+#: ../js/ui/runDialog.js:205
msgid "Please enter a command:"
msgstr "請輸入指令："
-#: ../js/ui/statusMenu.js:102
+#: ../js/ui/searchDisplay.js:310
+msgid "Searching..."
+msgstr "搜尋中…"
+
+#: ../js/ui/searchDisplay.js:324
+msgid "No matching results."
+msgstr "沒有相符的結果。"
+
+#: ../js/ui/statusMenu.js:161 ../js/ui/statusMenu.js:228
+msgid "Power Off..."
+msgstr "關閉電源…"
+
+#: ../js/ui/statusMenu.js:163 ../js/ui/statusMenu.js:227
+msgid "Suspend"
+msgstr "暫停"
+
+#: ../js/ui/statusMenu.js:184
msgid "Available"
msgstr "可用"
-#: ../js/ui/statusMenu.js:107
+#: ../js/ui/statusMenu.js:189
msgid "Busy"
msgstr "忙碌"
-#: ../js/ui/statusMenu.js:115
+#: ../js/ui/statusMenu.js:197
msgid "My Account"
msgstr "我的帳號"
-#: ../js/ui/statusMenu.js:119
+#: ../js/ui/statusMenu.js:201
msgid "System Settings"
msgstr "系統設定值"
-#: ../js/ui/statusMenu.js:126
+#: ../js/ui/statusMenu.js:208
msgid "Lock Screen"
msgstr "鎖定畫面"
-#: ../js/ui/statusMenu.js:130
+#: ../js/ui/statusMenu.js:213
msgid "Switch User"
msgstr "切換使用者"
-#: ../js/ui/statusMenu.js:135
+#: ../js/ui/statusMenu.js:218
msgid "Log Out..."
msgstr "登出…"
-#: ../js/ui/statusMenu.js:142
-msgid "Suspend..."
-msgstr "暫停…"
-
-#: ../js/ui/statusMenu.js:146
-msgid "Shut Down..."
-msgstr "關機…"
-
-#: ../js/ui/status/accessibility.js:83
+#: ../js/ui/status/accessibility.js:62
msgid "Zoom"
msgstr "縮放"
-#: ../js/ui/status/accessibility.js:89
-msgid "Screen Reader"
-msgstr "螢幕閱讀器"
-
-#: ../js/ui/status/accessibility.js:92
-msgid "Screen Keyboard"
-msgstr "螢幕鍵盤"
-
-#: ../js/ui/status/accessibility.js:95
+#. let screenReader = this._buildItem(_("Screen Reader"), APPLICATIONS_SCHEMA,
+#. 'screen-reader-enabled');
+#. this.menu.addMenuItem(screenReader);
+#. let screenKeyboard = this._buildItem(_("Screen Keyboard"), APPLICATIONS_SCHEMA,
+#. 'screen-keyboard-enabled');
+#. this.menu.addMenuItem(screenKeyboard);
+#: ../js/ui/status/accessibility.js:77
msgid "Visual Alerts"
msgstr "視覺警示"
-#: ../js/ui/status/accessibility.js:98
+#: ../js/ui/status/accessibility.js:80
msgid "Sticky Keys"
msgstr "黏性特殊鍵"
-#: ../js/ui/status/accessibility.js:101
+#: ../js/ui/status/accessibility.js:83
msgid "Slow Keys"
msgstr "遲緩按鍵"
-#: ../js/ui/status/accessibility.js:104
+#: ../js/ui/status/accessibility.js:86
msgid "Bounce Keys"
msgstr "回鍵"
-#: ../js/ui/status/accessibility.js:107
+#: ../js/ui/status/accessibility.js:89
msgid "Mouse Keys"
msgstr "滑鼠按鍵"
-#: ../js/ui/status/accessibility.js:111
+#: ../js/ui/status/accessibility.js:93
msgid "Universal Access Settings"
msgstr "無障礙功能設定值"
-#: ../js/ui/status/accessibility.js:163
+#: ../js/ui/status/accessibility.js:146
msgid "High Contrast"
msgstr "高反差"
-#: ../js/ui/status/accessibility.js:205
+#: ../js/ui/status/accessibility.js:183
msgid "Large Text"
msgstr "大型文字"
-#: ../js/ui/status/bluetooth.js:42 ../js/ui/status/bluetooth.js:241
+#: ../js/ui/status/bluetooth.js:42 ../js/ui/status/bluetooth.js:237
+#: ../js/ui/status/bluetooth.js:333 ../js/ui/status/bluetooth.js:367
+#: ../js/ui/status/bluetooth.js:407 ../js/ui/status/bluetooth.js:440
msgid "Bluetooth"
msgstr "藍牙"
msgid "Bluetooth Settings"
msgstr "藍牙設定值"
-#: ../js/ui/status/bluetooth.js:192
+#: ../js/ui/status/bluetooth.js:188
msgid "Connection"
msgstr "連線"
-#: ../js/ui/status/bluetooth.js:228
+#: ../js/ui/status/bluetooth.js:224
msgid "Send Files..."
msgstr "傳送檔案…"
-#: ../js/ui/status/bluetooth.js:233
+#: ../js/ui/status/bluetooth.js:229
msgid "Browse Files..."
msgstr "瀏覽檔案…"
-#: ../js/ui/status/bluetooth.js:242
+#: ../js/ui/status/bluetooth.js:238
msgid "Error browsing device"
msgstr "瀏覽裝置時發生錯誤"
-#: ../js/ui/status/bluetooth.js:243
+#: ../js/ui/status/bluetooth.js:239
#, c-format
msgid "The requested device cannot be browsed, error is '%s'"
msgstr "要求的裝置是不能瀏覽的，錯誤為「%s」"
-#: ../js/ui/status/bluetooth.js:251
+#: ../js/ui/status/bluetooth.js:247
msgid "Keyboard Settings"
msgstr "鍵盤設定值"
-#: ../js/ui/status/bluetooth.js:256
+#: ../js/ui/status/bluetooth.js:252
msgid "Mouse Settings"
msgstr "滑鼠設定值"
-#: ../js/ui/status/bluetooth.js:263 ../js/ui/status/volume.js:63
+#: ../js/ui/status/bluetooth.js:259 ../js/ui/status/volume.js:66
msgid "Sound Settings"
msgstr "音效設定值"
-#: ../js/ui/status/bluetooth.js:337 ../js/ui/status/bluetooth.js:371
-#: ../js/ui/status/bluetooth.js:411 ../js/ui/status/bluetooth.js:444
-msgid "Bluetooth Agent"
-msgstr "藍牙代理程式"
-
-#: ../js/ui/status/bluetooth.js:372
+#: ../js/ui/status/bluetooth.js:368
#, c-format
msgid "Authorization request from %s"
msgstr "來自「%s」的驗證要求"
-#: ../js/ui/status/bluetooth.js:378
+#: ../js/ui/status/bluetooth.js:374
#, c-format
msgid "Device %s wants access to the service '%s'"
msgstr "裝置 %s 想要存取服務「%s」"
-#: ../js/ui/status/bluetooth.js:380
+#: ../js/ui/status/bluetooth.js:376
msgid "Always grant access"
msgstr "永遠准許存取"
-#: ../js/ui/status/bluetooth.js:381
+#: ../js/ui/status/bluetooth.js:377
msgid "Grant this time only"
msgstr "只有這次准許"
-#: ../js/ui/status/bluetooth.js:382
+#: ../js/ui/status/bluetooth.js:378
msgid "Reject"
msgstr "拒絕"
-#: ../js/ui/status/bluetooth.js:412
+#: ../js/ui/status/bluetooth.js:408
#, c-format
msgid "Pairing confirmation for %s"
msgstr "%s 的配對確認"
-#: ../js/ui/status/bluetooth.js:418 ../js/ui/status/bluetooth.js:452
+#: ../js/ui/status/bluetooth.js:414 ../js/ui/status/bluetooth.js:448
#, c-format
msgid "Device %s wants to pair with this computer"
msgstr "裝置 %s 想要和這個電腦配對"
-#: ../js/ui/status/bluetooth.js:419
+#: ../js/ui/status/bluetooth.js:415
#, c-format
msgid "Please confirm whether the PIN '%s' matches the one on the device."
msgstr "請確認 PIN「%s」是否和裝置上的相符。"
-#: ../js/ui/status/bluetooth.js:421
+#: ../js/ui/status/bluetooth.js:417
msgid "Matches"
msgstr "相符"
-#: ../js/ui/status/bluetooth.js:422
+#: ../js/ui/status/bluetooth.js:418
msgid "Does not match"
msgstr "不相符"
-#: ../js/ui/status/bluetooth.js:445
+#: ../js/ui/status/bluetooth.js:441
#, c-format
msgid "Pairing request for %s"
msgstr "%s 的配對請求"
-#: ../js/ui/status/bluetooth.js:453
+#: ../js/ui/status/bluetooth.js:449
msgid "Please enter the PIN mentioned on the device."
msgstr "請輸入裝置所提及的 PIN。"
-#: ../js/ui/status/bluetooth.js:469
+#: ../js/ui/status/bluetooth.js:465
msgid "OK"
msgstr "確定"
-#: ../js/ui/status/keyboard.js:78
+#: ../js/ui/status/keyboard.js:73
+msgid "Show Keyboard Layout..."
+msgstr "顯示鍵盤配置…"
+
+#: ../js/ui/status/keyboard.js:76
msgid "Localization Settings"
msgstr "本地化設定值"
+#: ../js/ui/status/network.js:102 ../js/ui/status/network.js:1393
+msgid "<unknown>"
+msgstr "<不明>"
+
+#. Translators: this indicates that wireless or wwan is disabled by hardware killswitch
+#: ../js/ui/status/network.js:295
+msgid "disabled"
+msgstr "已停用"
+
+#: ../js/ui/status/network.js:476
+msgid "connecting..."
+msgstr "連線中…"
+
+#. Translators: this is for network connections that require some kind of key or password
+#: ../js/ui/status/network.js:479
+msgid "authentication required"
+msgstr "要求驗證"
+
+#. Translators: this is for wired network devices that are physically disconnected
+#: ../js/ui/status/network.js:485
+msgid "cable unplugged"
+msgstr "纜線已拔除"
+
+#. Translators: this is for a network device that cannot be activated (for example it
+#. is disabled by rfkill, or it has no coverage
+#: ../js/ui/status/network.js:489
+msgid "unavailable"
+msgstr "無法使用"
+
+#: ../js/ui/status/network.js:491
+msgid "connection failed"
+msgstr "連線失敗"
+
+#. TRANSLATORS: this is the indication that a connection for another logged in user is active,
+#. and we cannot access its settings (including the name)
+#: ../js/ui/status/network.js:571 ../js/ui/status/network.js:1341
+msgid "Connected (private)"
+msgstr "已連線 (私人)"
+
+#: ../js/ui/status/network.js:636
+msgid "Auto Ethernet"
+msgstr "自動使用乙太網絡"
+
+#: ../js/ui/status/network.js:697
+msgid "Auto broadband"
+msgstr "自動使用行動寬頻"
+
+#: ../js/ui/status/network.js:700
+msgid "Auto dial-up"
+msgstr "自動使用撥號"
+
+#. TRANSLATORS: this the automatic wireless connection name (including the network name)
+#: ../js/ui/status/network.js:843 ../js/ui/status/network.js:1353
+#, c-format
+msgid "Auto %s"
+msgstr "自動使用 %s"
+
+#: ../js/ui/status/network.js:845
+msgid "Auto bluetooth"
+msgstr "自動使用藍牙"
+
+#: ../js/ui/status/network.js:1355
+msgid "Auto wireless"
+msgstr "自動使用無線網絡"
+
+#: ../js/ui/status/network.js:1413
+msgid "More..."
+msgstr "更多…"
+
+#: ../js/ui/status/network.js:1436
+msgid "Enable networking"
+msgstr "啟用網絡"
+
+#: ../js/ui/status/network.js:1448
+msgid "Wired"
+msgstr "有線"
+
+#: ../js/ui/status/network.js:1459
+msgid "Wireless"
+msgstr "無線"
+
+#: ../js/ui/status/network.js:1469
+msgid "Mobile broadband"
+msgstr "行動寬頻"
+
+#: ../js/ui/status/network.js:1479
+msgid "VPN Connections"
+msgstr "VPN 連線"
+
+#: ../js/ui/status/network.js:1488
+msgid "Network Settings"
+msgstr "網絡設定值"
+
+#: ../js/ui/status/network.js:1783
+#, c-format
+msgid "You're now connected to mobile broadband connection '%s'"
+msgstr "你現在已連線至行動寬頻網絡連線「%s」"
+
+#: ../js/ui/status/network.js:1787
+#, c-format
+msgid "You're now connected to wireless network '%s'"
+msgstr "你現在已連線到無線網絡「%s」"
+
+#: ../js/ui/status/network.js:1791
+#, c-format
+msgid "You're now connected to wired network '%s'"
+msgstr "你現在已連線至有線網絡「%s」"
+
+#: ../js/ui/status/network.js:1795
+#, c-format
+msgid "You're now connected to VPN network '%s'"
+msgstr "你現在已連線至 VPN 網絡「%s」"
+
+#: ../js/ui/status/network.js:1800
+#, c-format
+msgid "You're now connected to '%s'"
+msgstr "你現在已連線至「%s」"
+
+#: ../js/ui/status/network.js:1808
+msgid "Connection established"
+msgstr "連線已建立"
+
+#: ../js/ui/status/network.js:1930
+msgid "Networking is disabled"
+msgstr "網絡已停用"
+
+#: ../js/ui/status/network.js:2055
+msgid "Network Manager"
+msgstr "網絡管理員"
+
#: ../js/ui/status/power.js:85
msgid "Power Settings"
msgstr "電源定值"
-#: ../js/ui/status/power.js:112
+#. 0 is reported when UPower does not have enough data
+#. to estimate battery life
+#: ../js/ui/status/power.js:111
+msgid "Estimating..."
+msgstr "評估中…"
+
+#: ../js/ui/status/power.js:118
#, c-format
msgid "%d hour remaining"
msgid_plural "%d hours remaining"
msgstr[0] "可使用 %d 小時"
#. TRANSLATORS: this is a time string, as in "%d hours %d minutes remaining"
-#: ../js/ui/status/power.js:115
+#: ../js/ui/status/power.js:121
#, c-format
msgid "%d %s %d %s remaining"
msgstr "剩下 %d %s %d %s"
-#: ../js/ui/status/power.js:117
+#: ../js/ui/status/power.js:123
msgid "hour"
msgid_plural "hours"
msgstr[0] "小時"
-#: ../js/ui/status/power.js:117
+#: ../js/ui/status/power.js:123
msgid "minute"
msgid_plural "minutes"
msgstr[0] "分鐘"
-#: ../js/ui/status/power.js:120
+#: ../js/ui/status/power.js:126
#, c-format
msgid "%d minute remaining"
msgid_plural "%d minutes remaining"
msgstr[0] "剩下 %d 分鐘"
-#: ../js/ui/status/power.js:235
+#: ../js/ui/status/power.js:228
msgid "AC adapter"
msgstr "AC 電源"
-#: ../js/ui/status/power.js:237
+#: ../js/ui/status/power.js:230
msgid "Laptop battery"
msgstr "手提電腦電池"
-#: ../js/ui/status/power.js:239
+#: ../js/ui/status/power.js:232
msgid "UPS"
msgstr "不斷電系統"
-#: ../js/ui/status/power.js:241
+#: ../js/ui/status/power.js:234
msgid "Monitor"
msgstr "監視器"
-#: ../js/ui/status/power.js:243
+#: ../js/ui/status/power.js:236
msgid "Mouse"
msgstr "滑鼠"
-#: ../js/ui/status/power.js:245
+#: ../js/ui/status/power.js:238
msgid "Keyboard"
msgstr "鍵盤"
-#: ../js/ui/status/power.js:247
+#: ../js/ui/status/power.js:240
msgid "PDA"
msgstr "PDA"
-#: ../js/ui/status/power.js:249
+#: ../js/ui/status/power.js:242
msgid "Cell phone"
msgstr "流動電話"
-#: ../js/ui/status/power.js:251
+#: ../js/ui/status/power.js:244
msgid "Media player"
msgstr "媒體播放器"
-#: ../js/ui/status/power.js:253
+#: ../js/ui/status/power.js:246
msgid "Tablet"
msgstr "手寫板"
-#: ../js/ui/status/power.js:255
+#: ../js/ui/status/power.js:248
msgid "Computer"
msgstr "電腦"
-#: ../js/ui/status/power.js:257 ../src/shell-app-system.c:1012
+#: ../js/ui/status/power.js:250 ../src/shell-app-system.c:1088
msgid "Unknown"
msgstr "不明"
-#: ../js/ui/status/volume.js:42
+#: ../js/ui/status/volume.js:45
msgid "Volume"
msgstr "音量"
-#: ../js/ui/status/volume.js:55
+#: ../js/ui/status/volume.js:58
msgid "Microphone"
msgstr "麥克風"
-#: ../js/ui/telepathyClient.js:563
+#: ../js/ui/telepathyClient.js:332
#, c-format
msgid "%s is online."
msgstr "%s 現在上線。"
-#: ../js/ui/telepathyClient.js:568
+#: ../js/ui/telepathyClient.js:337
#, c-format
msgid "%s is offline."
msgstr "%s 現在離線。"
-#: ../js/ui/telepathyClient.js:571
+#: ../js/ui/telepathyClient.js:340
#, c-format
msgid "%s is away."
msgstr "%s 已離開。"
-#: ../js/ui/telepathyClient.js:574
+#: ../js/ui/telepathyClient.js:343
#, c-format
msgid "%s is busy."
msgstr "%s 正忙碌。"
#. Translators: this is a time format string followed by a date.
#. If applicable, replace %X with a strftime format valid for your
#. locale, without seconds.
-#: ../js/ui/telepathyClient.js:668
+#: ../js/ui/telepathyClient.js:474
#, no-c-format
msgid "Sent at %X on %A"
msgstr "傳送於 %X %A"
-#: ../js/ui/viewSelector.js:26
-msgid "Search your computer"
-msgstr "搜尋你的電腦"
+#. Translators: this is the text displayed
+#. in the search entry when no search is
+#. active; it should not exceed ~30
+#. characters.
+#: ../js/ui/viewSelector.js:122
+msgid "Type to search..."
+msgstr "輸入以搜尋…"
+
+#: ../js/ui/viewSelector.js:142 ../src/shell-util.c:250
+msgid "Search"
+msgstr "搜尋"
-#: ../js/ui/windowAttentionHandler.js:43
+#: ../js/ui/windowAttentionHandler.js:42
#, c-format
msgid "%s has finished starting"
msgstr "%s 已完成啟動"
-#: ../js/ui/windowAttentionHandler.js:45
+#: ../js/ui/windowAttentionHandler.js:44
#, c-format
msgid "'%s' is ready"
msgstr "「%s」已就緒"
-#: ../js/ui/workspacesView.js:243
-msgid ""
-"Can't add a new workspace because maximum workspaces limit has been reached."
-msgstr "不能加入新的工作區，因為已達到最大工作區上限。"
-
-#: ../js/ui/workspacesView.js:259
-msgid "Can't remove the first workspace."
-msgstr "不能移除第一個工作區。"
-
#. translators:
#. * The number of sound outputs on a particular device
-#: ../src/gvc/gvc-mixer-control.c:1094
+#: ../src/gvc/gvc-mixer-control.c:1098
#, c-format
msgid "%u Output"
msgid_plural "%u Outputs"
#. translators:
#. * The number of sound inputs on a particular device
-#: ../src/gvc/gvc-mixer-control.c:1104
+#: ../src/gvc/gvc-mixer-control.c:1108
#, c-format
msgid "%u Input"
msgid_plural "%u Inputs"
msgstr[0] "%u 輸入"
-#: ../src/gvc/gvc-mixer-control.c:1402
+#: ../src/gvc/gvc-mixer-control.c:1406
msgid "System Sounds"
msgstr "系統音效"
-#: ../src/shell-global.c:1365
+#: ../src/main.c:397
+msgid "Print version"
+msgstr "顯示版本"
+
+#: ../src/shell-app.c:454
+#, c-format
+msgid "Failed to launch '%s'"
+msgstr "無法啟動「%s」"
+
+#: ../src/shell-global.c:1395
msgid "Less than a minute ago"
msgstr "少於一分鐘之前"
-#: ../src/shell-global.c:1369
+#: ../src/shell-global.c:1399
#, c-format
msgid "%d minute ago"
msgid_plural "%d minutes ago"
msgstr[0] "%d 分鐘前"
-#: ../src/shell-global.c:1374
+#: ../src/shell-global.c:1404
#, c-format
msgid "%d hour ago"
msgid_plural "%d hours ago"
msgstr[0] "%d 小時前"
-#: ../src/shell-global.c:1379
+#: ../src/shell-global.c:1409
#, c-format
msgid "%d day ago"
msgid_plural "%d days ago"
msgstr[0] "%d 天前"
-#: ../src/shell-global.c:1384
+#: ../src/shell-global.c:1414
#, c-format
msgid "%d week ago"
msgid_plural "%d weeks ago"
msgstr[0] "%d 週前"
+#: ../src/shell-mobile-providers.c:80
+msgid "United Kingdom"
+msgstr "英國"
+
+#: ../src/shell-mobile-providers.c:526
+msgid "Default"
+msgstr "預設值"
+
+#: ../src/shell-polkit-authentication-agent.c:334
+msgid "Authentication dialog was dismissed by the user"
+msgstr "驗證對話盒被使用者取消了"
+
#: ../src/shell-util.c:89
msgid "Home Folder"
msgstr "家目錄"
msgid "File System"
msgstr "檔案系統"
-#: ../src/shell-util.c:250
-msgid "Search"
-msgstr "搜尋"
-
#. Translators: the first string is the name of a gvfs
#. * method, and the second string is a path. For
#. * example, "Trash: some-directory". It means that the
msgid "%1$s: %2$s"
msgstr "%1$s：%2$s"
-#~ msgid "Clock"
-#~ msgstr "時鐘"
-
-#~ msgid "Customize the panel clock"
-#~ msgstr "自訂面板時鐘"
-
-#~ msgid "Custom format of the clock"
-#~ msgstr "自訂時鐘的格式"
-
-#~ msgid "Hour format"
-#~ msgstr "小時格式"
-
-#~ msgid ""
-#~ "If true and format is either \"12-hour\" or \"24-hour\", display seconds "
-#~ "in time."
-#~ msgstr "如果設為 true 且格式為「12-小時」或「24-小時」，在時刻裡顯示秒鐘。"
-
-#~ msgid ""
-#~ "This key specifies the format used by the panel clock when the format key "
-#~ "is set to \"custom\". You can use conversion specifiers understood by "
-#~ "strftime() to obtain a specific format. See the strftime() manual for "
-#~ "more information."
-#~ msgstr ""
-#~ "這個設定鍵是在面板時鐘的「format」設定鍵被設為「custom」時使用的自訂格式。"
-#~ "您可以用可被 strftime() 理解的轉換規範來取得所指定的格式。請查閱 strftime"
-#~ "() 手冊以獲取更多資訊。"
-
-#~ msgid ""
-#~ "This key specifies the hour format used by the panel clock. Possible "
-#~ "values are \"12-hour\", \"24-hour\", \"unix\" and \"custom\". If set to "
-#~ "\"unix\", the clock will display time in seconds since Epoch, i.e. "
-#~ "1970-01-01. If set to \"custom\", the clock will display time according "
-#~ "to the format specified in the custom_format key. Note that if set to "
-#~ "either \"unix\" or \"custom\", the show_date and show_seconds keys are "
-#~ "ignored."
-#~ msgstr ""
-#~ "這個設定值指定了面板時鐘使用的小時格式。可用的數值有「12-hour」、「24-"
-#~ "hour」、「unix」和「custom」。如果設定為「unix」，時鐘會顯示自 Epoch，即 "
-#~ "1970-01-01 以來的秒數。如果設定為「custom」，時鐘會根據 custom_format 設定"
-#~ "鍵顯示時刻。注意不管設為「unix」或「custom」，show_date 和 show_seconds 設"
-#~ "定鍵都會被忽略。"
-
-#~ msgid "Clock Format"
-#~ msgstr "時鐘格式"
-
-#~ msgid "Clock Preferences"
-#~ msgstr "時鐘偏好設定"
-
-#~ msgid "Panel Display"
-#~ msgstr "面板顯示"
-
-#~ msgid "Show seco_nds"
-#~ msgstr "顯示秒數(_N)"
-
-#~ msgid "Show the _date"
-#~ msgstr "顯示日期(_D)"
-
-#~ msgid "_12 hour format"
-#~ msgstr "_12 小時制"
-
-#~ msgid "_24 hour format"
-#~ msgstr "_24 小時制"
-
-#~ msgid "Preferences"
-#~ msgstr "偏好設定"
-
-#~ msgid "Overview workspace view mode"
-#~ msgstr "概覽工作區檢視模式"
-
-#~ msgid ""
-#~ "The selected workspace view mode in the overview. Supported values are "
-#~ "\"single\" and \"grid\"."
-#~ msgstr ""
-#~ "在概覽中選取的工作區檢視模式。支援的數值有「single」(單一)和「grid」(格"
-#~ "線)。"
-
-#~ msgid "Drag here to add favorites"
-#~ msgstr "拖放到這裡加入喜好"
-
-#~ msgid "Find"
-#~ msgstr "尋找"
-
-#~ msgid "Searching..."
-#~ msgstr "搜尋中…"
-
-#~ msgid "No matching results."
-#~ msgstr "沒有相符的結果。"
-
-#~ msgid "Invisible"
-#~ msgstr "隱形"
-
-#~ msgid "ON"
-#~ msgstr "開"
-
-#~ msgid "OFF"
-#~ msgstr "關"
+#~ msgid "No such application"
+#~ msgstr "沒有這個應用程式"
#
msgid ""
msgstr ""
-"Project-Id-Version: gnome-shell 2.91.6\n"
+"Project-Id-Version: gnome-shell 2.91.91\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2011-02-04 13:12+0800\n"
-"PO-Revision-Date: 2011-02-04 12:41+0800\n"
+"POT-Creation-Date: 2011-03-22 19:42+0800\n"
+"PO-Revision-Date: 2011-03-22 12:30+0800\n"
"Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
"Language-Team: Chinese (Taiwan) <zh-l10n@lists.linux.org.tw>\n"
"Language: \n"
msgstr "指令 (Alt-F2) 對話盒歷史紀錄"
#: ../data/org.gnome.shell.gschema.xml.in.h:7
+#, fuzzy
+msgid "History for the looking glass dialog"
+msgstr "指令 (Alt-F2) 對話盒歷史紀錄"
+
+#: ../data/org.gnome.shell.gschema.xml.in.h:8
msgid "If true, display date in the clock, in addition to time."
msgstr "如設定為「true」，除了在時鐘內顯示日期外還顯示時刻。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:8
+#: ../data/org.gnome.shell.gschema.xml.in.h:9
msgid "If true, display seconds in time."
msgstr "如設定為「true」，在時刻中顯示秒數。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:9
+#: ../data/org.gnome.shell.gschema.xml.in.h:10
msgid "If true, display the ISO week date in the calendar."
msgstr "如果設為 true，在日曆中顯示 ISO 週數。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:10
+#: ../data/org.gnome.shell.gschema.xml.in.h:11
msgid "List of desktop file IDs for favorite applications"
msgstr "喜好的應用程式桌面檔案 ID 清單"
-#: ../data/org.gnome.shell.gschema.xml.in.h:12
+#: ../data/org.gnome.shell.gschema.xml.in.h:13
#, no-c-format
msgid ""
"Sets the GStreamer pipeline used to encode recordings. It follows the syntax "
"%T ! queue ! webmmux' 即使用 VP8 codec 錄製 WEBM。%T 是在系統的最佳化執行緒計"
"數猜測時使用的佔位符。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:13
+#: ../data/org.gnome.shell.gschema.xml.in.h:14
msgid "Show date in clock"
msgstr "在時鐘內顯示日期"
-#: ../data/org.gnome.shell.gschema.xml.in.h:14
+#: ../data/org.gnome.shell.gschema.xml.in.h:15
msgid "Show the week date in the calendar"
msgstr "在日曆中顯示週數"
-#: ../data/org.gnome.shell.gschema.xml.in.h:15
+#: ../data/org.gnome.shell.gschema.xml.in.h:16
msgid "Show time with seconds"
msgstr "在時刻中顯示秒數"
-#: ../data/org.gnome.shell.gschema.xml.in.h:16
+#: ../data/org.gnome.shell.gschema.xml.in.h:17
msgid ""
"The applications corresponding to these identifiers will be displayed in the "
"favorites area."
msgstr "對應這些辨別碼的應用程式會顯示在喜好區域。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:17
+#: ../data/org.gnome.shell.gschema.xml.in.h:18
msgid ""
"The filename for recorded screencasts will be a unique filename based on the "
"current date, and use this extension. It should be changed when recording to "
"錄製好的畫面廣播檔案名稱會以目前的時刻作為獨特的檔名，並使用這個延伸檔名。當"
"錄製為不同的容器格式時應該做適當變更。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:18
+#: ../data/org.gnome.shell.gschema.xml.in.h:19
msgid ""
"The framerate of the resulting screencast recordered by GNOME Shell's "
"screencast recorder in frames-per-second."
"由 GNOME Shell 的畫面廣播錄製程式所錄製成果的框架率，以 frames-per-second "
"計。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:19
+#: ../data/org.gnome.shell.gschema.xml.in.h:20
msgid "The gstreamer pipeline used to encode the screencast"
msgstr "用來編碼畫面廣播的 gstreamer 管線"
-#: ../data/org.gnome.shell.gschema.xml.in.h:20
+#: ../data/org.gnome.shell.gschema.xml.in.h:21
msgid ""
"The shell normally monitors active applications in order to present the most "
"used ones (e.g. in launchers). While this data will be kept private, you may "
"器中）。雖然這個資料會保持隱密，但是您可能會基於隱私的理由想要停用這個功能。"
"請注意這麼做並不會移除已儲存的資料。"
-#: ../data/org.gnome.shell.gschema.xml.in.h:21
+#: ../data/org.gnome.shell.gschema.xml.in.h:22
msgid "Uuids of extensions to disable"
msgstr "要停用的延伸檔名 Uuid"
-#: ../data/org.gnome.shell.gschema.xml.in.h:22
+#: ../data/org.gnome.shell.gschema.xml.in.h:23
msgid "Whether to collect stats about applications usage"
msgstr "是否收集關於應用程式使用率的狀態"
-#: ../data/org.gnome.shell.gschema.xml.in.h:23
+#: ../data/org.gnome.shell.gschema.xml.in.h:24
msgid "disabled OpenSearch providers"
msgstr "已停用 OpenSearch 提供者"
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:1
-msgid "Clip the crosshairs at the center"
-msgstr "點選中央的十字準星"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:2
-msgid "Color of the crosshairs"
-msgstr "十字準星的顏色"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:3
-msgid ""
-"Determines the length of the vertical and horizontal lines that make up the "
-"crosshairs."
-msgstr "決定組成十字準星的垂直和水平線條的長度。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:4
-msgid ""
-"Determines the position of the magnified mouse image within the magnified "
-"view and how it reacts to system mouse movement. The values are - none: no "
-"mouse tracking; - centered: the mouse image is displayed at the center of "
-"the zoom region (which also represents the point under the system mouse) and "
-"the magnified contents are scrolled as the system mouse moves; - "
-"proportional: the position of the magnified mouse in the zoom region is "
-"proportionally the same as the position of the system mouse on screen; - "
-"push: when the magnified mouse intersects a boundary of the zoom region, the "
-"contents are scrolled into view."
-msgstr ""
-"決定放大的滑鼠圖片在放大鏡檢 視中的位置以及它如何反應系統滑鼠的移動。數值有 "
-"- none: 不追蹤滑鼠；- centered: 滑鼠圖片顯示於放大區域的中央（也代表系統滑鼠"
-"下方的點）而放大的內容也會隨系統滑鼠移動而捲動；- proportional: 放大的滑鼠在"
-"縮放區域中的位置和系統滑鼠在螢幕中的位置是成比例的；- push: 當放大的滑鼠與縮"
-"放區域邊界交錯時，內容會捲動到檢視中。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:5
-msgid ""
-"Determines the transparency of the crosshairs, from fully opaque to fully "
-"transparent."
-msgstr "決定十字準星的透明度，從完全不透明到完全透明。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:6
-msgid ""
-"Determines whether the crosshairs intersect the magnified mouse sprite, or "
-"are clipped such that the ends of the horizontal and vertical lines surround "
-"the mouse image."
-msgstr ""
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:7
-msgid "Enable lens mode"
-msgstr "啟用鏡頭模式"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:8
-msgid ""
-"Enables/disables display of crosshairs centered on the magnified mouse "
-"sprite."
-msgstr ""
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:9
-msgid ""
-"For centered mouse tracking, when the system pointer is at or near the edge "
-"of the screen, the magnified contents continue to scroll such that the "
-"screen edge moves into the magnified view."
-msgstr ""
-"對於置中式的滑鼠追蹤，當系統指標位於或接近螢幕的邊緣時，放大的內容也會持續捲"
-"動，讓螢幕的邊緣移進放大的檢視範圍。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:10
-msgid "Length of the crosshairs"
-msgstr "十字準星長度"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:11
-msgid "Magnification factor"
-msgstr "放大率"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:12
-msgid "Mouse Tracking Mode"
-msgstr "滑鼠追蹤模式"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:13
-msgid "Opacity of the crosshairs"
-msgstr "十字準星透明度"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:14
-msgid "Screen position"
-msgstr "螢幕位置"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:15
-msgid "Scroll magnified contents beyond the edges of the desktop"
-msgstr "在桌面邊緣時捲動放大的內容"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:16
-msgid "Show or hide crosshairs"
-msgstr "顯示或隱藏十字準星"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:17
-msgid "Show or hide the magnifier"
-msgstr "顯示或隱藏放大鏡"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:18
-msgid "Show or hide the magnifier and all of its zoom regions."
-msgstr "顯示或隱藏放大鏡和所有被它放大的區域。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:19
-msgid ""
-"The color of the the vertical and horizontal lines that make up the "
-"crosshairs."
-msgstr "組成十字準星的垂直和水平線條的顏色。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:20
-msgid ""
-"The magnified view either fills the entire screen, or occupies the top-half, "
-"bottom-half, left-half, or right-half of the screen."
-msgstr "放大的檢視要佔據整個螢幕，或是只佔螢幕的上半、下半、左半或右半邊。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:21
-msgid ""
-"The power of the magnification. A value of 1.0 means no magnification. A "
-"value of 2.0 doubles the size."
-msgstr "放大的倍數。數值 1.0 表示不放大。數值 2.0 為放大兩倍。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:22
-msgid "Thickness of the crosshairs"
-msgstr "十字準星厚度"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:23
-msgid ""
-"Whether the magnified view should be centered over the location of the "
-"system mouse and move with it."
-msgstr "放大的檢視是否應以系統滑鼠的位置為中心點並隨滑鼠移動。"
-
-#: ../data/org.gnome.accessibility.magnifier.gschema.xml.in.h:24
-msgid "Width of the vertical and horizontal lines that make up the crosshairs."
-msgstr "組成十字準星的垂直和水平線條的寬度。"
-
-#: ../js/misc/util.js:86
+#: ../js/misc/util.js:71
msgid "Command not found"
msgstr "找不到指令"
#. Replace "Error invoking GLib.shell_parse_argv: " with
#. something nicer
-#: ../js/misc/util.js:113
+#: ../js/misc/util.js:98
msgid "Could not parse command:"
msgstr "無法分析指令："
-#: ../js/misc/util.js:135
-msgid "No such application"
-msgstr "沒有這個應用程式"
-
-#: ../js/misc/util.js:148
+#: ../js/misc/util.js:106
#, c-format
msgid "Execution of '%s' failed:"
msgstr "執行「%s」失敗："
#. Translators: Filter to display all applications
-#: ../js/ui/appDisplay.js:164
+#: ../js/ui/appDisplay.js:230
msgid "All"
msgstr "全部"
-#: ../js/ui/appDisplay.js:245
+#: ../js/ui/appDisplay.js:328
msgid "APPLICATIONS"
msgstr "程式集"
-#: ../js/ui/appDisplay.js:275
-msgid "PREFERENCES"
-msgstr "偏好設定"
+#: ../js/ui/appDisplay.js:354
+msgid "SETTINGS"
+msgstr "設定值"
-#: ../js/ui/appDisplay.js:572
+#: ../js/ui/appDisplay.js:620
msgid "New Window"
msgstr "新視窗"
-#: ../js/ui/appDisplay.js:576
+#: ../js/ui/appDisplay.js:623
msgid "Remove from Favorites"
msgstr "自喜好中移除"
-#: ../js/ui/appDisplay.js:577
+#: ../js/ui/appDisplay.js:624
msgid "Add to Favorites"
msgstr "加入喜好"
#. Translators: Shown in calendar event list for all day events
#. * Keep it short, best if you can use less then 10 characters
#.
-#: ../js/ui/calendar.js:65
-#, fuzzy
-#| msgid "All Day"
+#: ../js/ui/calendar.js:66
msgctxt "event list time"
msgid "All Day"
msgstr "整天"
#. Translators: Shown in calendar event list, if 24h format
-#: ../js/ui/calendar.js:70
+#: ../js/ui/calendar.js:71
msgctxt "event list time"
msgid "%H:%M"
-msgstr ""
+msgstr "%H:%M"
#. Transators: Shown in calendar event list, if 12h format
-#: ../js/ui/calendar.js:77
-#, fuzzy
-#| msgid "%a %l:%M %p"
+#: ../js/ui/calendar.js:78
msgctxt "event list time"
msgid "%l:%M %p"
-msgstr "%a %p %l:%M"
+msgstr "%p %l:%M"
#. Translators: Calendar grid abbreviation for Sunday.
#. *
#. * NOTE: These grid abbreviations are always shown together
#. * and in order, e.g. "S M T W T F S".
#.
-#: ../js/ui/calendar.js:117
-#, fuzzy
-#| msgid "S"
+#: ../js/ui/calendar.js:118
msgctxt "grid sunday"
msgid "S"
msgstr "日"
#. Translators: Calendar grid abbreviation for Monday
-#: ../js/ui/calendar.js:119
-#, fuzzy
-#| msgid "M"
+#: ../js/ui/calendar.js:120
msgctxt "grid monday"
msgid "M"
msgstr "一"
#. Translators: Calendar grid abbreviation for Tuesday
-#: ../js/ui/calendar.js:121
-#, fuzzy
-#| msgid "T"
+#: ../js/ui/calendar.js:122
msgctxt "grid tuesday"
msgid "T"
msgstr "二"
#. Translators: Calendar grid abbreviation for Wednesday
-#: ../js/ui/calendar.js:123
-#, fuzzy
-#| msgid "W"
+#: ../js/ui/calendar.js:124
msgctxt "grid wednesday"
msgid "W"
msgstr "三"
#. Translators: Calendar grid abbreviation for Thursday
-#: ../js/ui/calendar.js:125
-#, fuzzy
-#| msgid "T"
+#: ../js/ui/calendar.js:126
msgctxt "grid thursday"
msgid "T"
-msgstr "二"
+msgstr "四"
#. Translators: Calendar grid abbreviation for Friday
-#: ../js/ui/calendar.js:127
-#, fuzzy
-#| msgid "F"
+#: ../js/ui/calendar.js:128
msgctxt "grid friday"
msgid "F"
msgstr "五"
#. Translators: Calendar grid abbreviation for Saturday
-#: ../js/ui/calendar.js:129
-#, fuzzy
-#| msgid "S"
+#: ../js/ui/calendar.js:130
msgctxt "grid saturday"
msgid "S"
-msgstr "日"
+msgstr "六"
#. Translators: Event list abbreviation for Sunday.
#. *
#. * so they need to be unique (e.g. Tuesday and Thursday cannot
#. * both be 'T').
#.
-#: ../js/ui/calendar.js:142
-#, fuzzy
-#| msgid "Su"
+#: ../js/ui/calendar.js:143
msgctxt "list sunday"
msgid "Su"
msgstr "日"
#. Translators: Event list abbreviation for Monday
-#: ../js/ui/calendar.js:144
-#, fuzzy
-#| msgid "M"
+#: ../js/ui/calendar.js:145
msgctxt "list monday"
msgid "M"
msgstr "一"
#. Translators: Event list abbreviation for Tuesday
-#: ../js/ui/calendar.js:146
-#, fuzzy
-#| msgid "T"
+#: ../js/ui/calendar.js:147
msgctxt "list tuesday"
msgid "T"
msgstr "二"
#. Translators: Event list abbreviation for Wednesday
-#: ../js/ui/calendar.js:148
-#, fuzzy
-#| msgid "W"
+#: ../js/ui/calendar.js:149
msgctxt "list wednesday"
msgid "W"
msgstr "三"
#. Translators: Event list abbreviation for Thursday
-#: ../js/ui/calendar.js:150
-#, fuzzy
-#| msgid "Th"
+#: ../js/ui/calendar.js:151
msgctxt "list thursday"
msgid "Th"
msgstr "四"
#. Translators: Event list abbreviation for Friday
-#: ../js/ui/calendar.js:152
-#, fuzzy
-#| msgid "F"
+#: ../js/ui/calendar.js:153
msgctxt "list friday"
msgid "F"
msgstr "五"
#. Translators: Event list abbreviation for Saturday
-#: ../js/ui/calendar.js:154
-#, fuzzy
-#| msgid "S"
+#: ../js/ui/calendar.js:155
msgctxt "list saturday"
msgid "S"
-msgstr "日"
+msgstr "六"
#. Translators: Text to show if there are no events
-#: ../js/ui/calendar.js:701
+#: ../js/ui/calendar.js:704
msgid "Nothing Scheduled"
msgstr "沒有預訂行程"
#. Translators: Shown on calendar heading when selected day occurs on current year
-#: ../js/ui/calendar.js:717
-#, fuzzy
-#| msgid "%A %B %e, %Y"
+#: ../js/ui/calendar.js:720
msgctxt "calendar heading"
msgid "%A, %B %d"
-msgstr "%Y %B %e %A"
+msgstr "%B%d日%A"
#. Translators: Shown on calendar heading when selected day occurs on different year
-#: ../js/ui/calendar.js:720
-#, fuzzy
-#| msgid "%A %B %e, %Y"
+#: ../js/ui/calendar.js:723
msgctxt "calendar heading"
msgid "%A, %B %d, %Y"
-msgstr "%Y %B %e %A"
+msgstr "%Y年%B%d日%A"
-#: ../js/ui/calendar.js:730
+#: ../js/ui/calendar.js:733
msgid "Today"
msgstr "今天"
-#: ../js/ui/calendar.js:734
+#: ../js/ui/calendar.js:737
msgid "Tomorrow"
msgstr "明天"
-#: ../js/ui/calendar.js:743
+#: ../js/ui/calendar.js:746
msgid "This week"
msgstr "本週"
-#: ../js/ui/calendar.js:751
+#: ../js/ui/calendar.js:754
msgid "Next week"
msgstr "下週"
-#: ../js/ui/dash.js:27
+#: ../js/ui/dash.js:174 ../js/ui/messageTray.js:945
msgid "Remove"
msgstr "移除"
msgid "Date and Time Settings"
msgstr "日期與時刻設定值"
-#: ../js/ui/dateMenu.js:110
+#: ../js/ui/dateMenu.js:111
msgid "Open Calendar"
msgstr "開啟行事曆"
#. Translators: This is the time format with date used
#. in 24-hour mode.
-#: ../js/ui/dateMenu.js:149
+#: ../js/ui/dateMenu.js:164
msgid "%a %b %e, %R:%S"
msgstr "%b %e %a, %R:%S"
-#: ../js/ui/dateMenu.js:150
+#: ../js/ui/dateMenu.js:165
msgid "%a %b %e, %R"
msgstr "%b %e %a, %R"
#. Translators: This is the time format without date used
#. in 24-hour mode.
-#: ../js/ui/dateMenu.js:154
+#: ../js/ui/dateMenu.js:169
msgid "%a %R:%S"
msgstr "%a %R:%S"
-#: ../js/ui/dateMenu.js:155
+#: ../js/ui/dateMenu.js:170
msgid "%a %R"
msgstr "%a %R"
#. Translators: This is a time format with date used
#. for AM/PM.
-#: ../js/ui/dateMenu.js:162
+#: ../js/ui/dateMenu.js:177
msgid "%a %b %e, %l:%M:%S %p"
msgstr "%b %e %a, %p %l:%M:%S"
-#: ../js/ui/dateMenu.js:163
+#: ../js/ui/dateMenu.js:178
msgid "%a %b %e, %l:%M %p"
msgstr "%b %e %a, %p %l:%M"
#. Translators: This is a time format without date used
#. for AM/PM.
-#: ../js/ui/dateMenu.js:167
+#: ../js/ui/dateMenu.js:182
msgid "%a %l:%M:%S %p"
msgstr "%a %p %l:%M:%S"
-#: ../js/ui/dateMenu.js:168
+#: ../js/ui/dateMenu.js:183
msgid "%a %l:%M %p"
msgstr "%a %p %l:%M"
msgid "%A %B %e, %Y"
msgstr "%Y %B %e %A"
-#: ../js/ui/docDisplay.js:18
+#: ../js/ui/docDisplay.js:19
msgid "RECENT ITEMS"
msgstr "最近使用項目"
msgid "Confirm"
msgstr "確認"
-#: ../js/ui/endSessionDialog.js:400 ../js/ui/status/bluetooth.js:470
+#: ../js/ui/endSessionDialog.js:400 ../js/ui/status/bluetooth.js:466
msgid "Cancel"
msgstr "取消"
-#: ../js/ui/lookingGlass.js:556
+#: ../js/ui/lookingGlass.js:588
msgid "No extensions installed"
msgstr "沒有安裝擴充功能"
-#: ../js/ui/lookingGlass.js:593
+#: ../js/ui/lookingGlass.js:625
msgid "Enabled"
msgstr "已啟用"
#. translators:
#. * The device has been disabled
-#: ../js/ui/lookingGlass.js:595 ../src/gvc/gvc-mixer-control.c:1087
+#: ../js/ui/lookingGlass.js:627 ../src/gvc/gvc-mixer-control.c:1091
msgid "Disabled"
msgstr "已停用"
-#: ../js/ui/lookingGlass.js:597
+#: ../js/ui/lookingGlass.js:629
msgid "Error"
msgstr "錯誤"
-#: ../js/ui/lookingGlass.js:599
+#: ../js/ui/lookingGlass.js:631
msgid "Out of date"
msgstr "過期"
-#: ../js/ui/lookingGlass.js:624
+#: ../js/ui/lookingGlass.js:656
msgid "View Source"
msgstr "檢示來源"
-#: ../js/ui/lookingGlass.js:630
+#: ../js/ui/lookingGlass.js:662
msgid "Web Page"
msgstr "網頁"
-#: ../js/ui/messageTray.js:1809
+#: ../js/ui/messageTray.js:938
+#, fuzzy
+msgid "Open"
+msgstr "開啟"
+
+#: ../js/ui/messageTray.js:2018
msgid "System Information"
msgstr "系統資訊"
-#: ../js/ui/overview.js:88
+#: ../js/ui/overview.js:89
msgid "Undo"
msgstr "復原"
-#: ../js/ui/overview.js:159
+#: ../js/ui/overview.js:184
msgid "Windows"
msgstr "視窗"
-#: ../js/ui/overview.js:162
+#: ../js/ui/overview.js:187
msgid "Applications"
msgstr "應用程式"
+#. Translators: this is the name of the dock/favorites area on
+#. the left of the overview
+#: ../js/ui/overview.js:203
+#, fuzzy
+msgid "Dash"
+msgstr "破折號"
+
#. TODO - _quit() doesn't really work on apps in state STARTING yet
-#: ../js/ui/panel.js:480
+#: ../js/ui/panel.js:515
#, c-format
msgid "Quit %s"
msgstr "結束 %s"
#. Button on the left side of the panel.
#. Translators: If there is no suitable word for "Activities" in your language, you can use the word for "Overview".
-#: ../js/ui/panel.js:614
+#: ../js/ui/panel.js:876
msgid "Activities"
msgstr "概覽 "
-#: ../js/ui/placeDisplay.js:106
+#: ../js/ui/panel.js:977
+msgid "Top Bar"
+msgstr "頂端列"
+
+#: ../js/ui/placeDisplay.js:122
#, c-format
msgid "Failed to unmount '%s'"
msgstr "無法卸載「%s」"
-#: ../js/ui/placeDisplay.js:109
+#: ../js/ui/placeDisplay.js:125
msgid "Retry"
msgstr "重試"
-#: ../js/ui/placeDisplay.js:150
+#: ../js/ui/placeDisplay.js:165
msgid "Connect to..."
msgstr "連接到…"
-#: ../js/ui/placeDisplay.js:386
+#: ../js/ui/placeDisplay.js:380
msgid "PLACES & DEVICES"
msgstr "位置 & 裝置"
#. "ON" and "OFF") or "toggle-switch-intl" (for toggle
#. switches containing "◯" and "|"). Other values will
#. simply result in invisible toggle switches.
-#: ../js/ui/popupMenu.js:33
+#: ../js/ui/popupMenu.js:636
msgid "toggle-switch-us"
msgstr "toggle-switch-us"
-#: ../js/ui/runDialog.js:209
+#: ../js/ui/runDialog.js:205
msgid "Please enter a command:"
msgstr "請輸入指令："
-#: ../js/ui/statusMenu.js:102
+#: ../js/ui/searchDisplay.js:310
+msgid "Searching..."
+msgstr "搜尋中…"
+
+#: ../js/ui/searchDisplay.js:324
+msgid "No matching results."
+msgstr "沒有相符的結果。"
+
+#: ../js/ui/statusMenu.js:161 ../js/ui/statusMenu.js:228
+msgid "Power Off..."
+msgstr "關閉電源…"
+
+#: ../js/ui/statusMenu.js:163 ../js/ui/statusMenu.js:227
+msgid "Suspend"
+msgstr "暫停"
+
+#: ../js/ui/statusMenu.js:184
msgid "Available"
msgstr "可用"
-#: ../js/ui/statusMenu.js:107
+#: ../js/ui/statusMenu.js:189
msgid "Busy"
msgstr "忙碌"
-#: ../js/ui/statusMenu.js:115
+#: ../js/ui/statusMenu.js:197
msgid "My Account"
msgstr "我的帳號"
-#: ../js/ui/statusMenu.js:119
+#: ../js/ui/statusMenu.js:201
msgid "System Settings"
msgstr "系統設定值"
-#: ../js/ui/statusMenu.js:126
+#: ../js/ui/statusMenu.js:208
msgid "Lock Screen"
msgstr "鎖定畫面"
-#: ../js/ui/statusMenu.js:130
+#: ../js/ui/statusMenu.js:213
msgid "Switch User"
msgstr "切換使用者"
-#: ../js/ui/statusMenu.js:135
+#: ../js/ui/statusMenu.js:218
msgid "Log Out..."
msgstr "登出…"
-#: ../js/ui/statusMenu.js:142
-msgid "Suspend..."
-msgstr "暫停…"
-
-#: ../js/ui/statusMenu.js:146
-msgid "Shut Down..."
-msgstr "關機…"
-
-#: ../js/ui/status/accessibility.js:83
+#: ../js/ui/status/accessibility.js:62
msgid "Zoom"
msgstr "縮放"
-#: ../js/ui/status/accessibility.js:89
-msgid "Screen Reader"
-msgstr "螢幕閱讀器"
-
-#: ../js/ui/status/accessibility.js:92
-msgid "Screen Keyboard"
-msgstr "螢幕鍵盤"
-
-#: ../js/ui/status/accessibility.js:95
+#. let screenReader = this._buildItem(_("Screen Reader"), APPLICATIONS_SCHEMA,
+#. 'screen-reader-enabled');
+#. this.menu.addMenuItem(screenReader);
+#. let screenKeyboard = this._buildItem(_("Screen Keyboard"), APPLICATIONS_SCHEMA,
+#. 'screen-keyboard-enabled');
+#. this.menu.addMenuItem(screenKeyboard);
+#: ../js/ui/status/accessibility.js:77
msgid "Visual Alerts"
msgstr "視覺警示"
-#: ../js/ui/status/accessibility.js:98
+#: ../js/ui/status/accessibility.js:80
msgid "Sticky Keys"
msgstr "黏性特殊鍵"
-#: ../js/ui/status/accessibility.js:101
+#: ../js/ui/status/accessibility.js:83
msgid "Slow Keys"
msgstr "遲緩按鍵"
-#: ../js/ui/status/accessibility.js:104
+#: ../js/ui/status/accessibility.js:86
msgid "Bounce Keys"
msgstr "回鍵"
-#: ../js/ui/status/accessibility.js:107
+#: ../js/ui/status/accessibility.js:89
msgid "Mouse Keys"
msgstr "滑鼠按鍵"
-#: ../js/ui/status/accessibility.js:111
+#: ../js/ui/status/accessibility.js:93
msgid "Universal Access Settings"
msgstr "無障礙功能設定值"
-#: ../js/ui/status/accessibility.js:163
+#: ../js/ui/status/accessibility.js:146
msgid "High Contrast"
msgstr "高反差"
-#: ../js/ui/status/accessibility.js:205
+#: ../js/ui/status/accessibility.js:183
msgid "Large Text"
msgstr "大型文字"
-#: ../js/ui/status/bluetooth.js:42 ../js/ui/status/bluetooth.js:241
+#: ../js/ui/status/bluetooth.js:42 ../js/ui/status/bluetooth.js:237
+#: ../js/ui/status/bluetooth.js:333 ../js/ui/status/bluetooth.js:367
+#: ../js/ui/status/bluetooth.js:407 ../js/ui/status/bluetooth.js:440
msgid "Bluetooth"
msgstr "藍牙"
msgid "Bluetooth Settings"
msgstr "藍牙設定值"
-#: ../js/ui/status/bluetooth.js:192
+#: ../js/ui/status/bluetooth.js:188
msgid "Connection"
msgstr "連線"
-#: ../js/ui/status/bluetooth.js:228
+#: ../js/ui/status/bluetooth.js:224
msgid "Send Files..."
msgstr "傳送檔案…"
-#: ../js/ui/status/bluetooth.js:233
+#: ../js/ui/status/bluetooth.js:229
msgid "Browse Files..."
msgstr "瀏覽檔案…"
-#: ../js/ui/status/bluetooth.js:242
+#: ../js/ui/status/bluetooth.js:238
msgid "Error browsing device"
msgstr "瀏覽裝置時發生錯誤"
-#: ../js/ui/status/bluetooth.js:243
+#: ../js/ui/status/bluetooth.js:239
#, c-format
msgid "The requested device cannot be browsed, error is '%s'"
msgstr "要求的裝置是不能瀏覽的，錯誤為「%s」"
-#: ../js/ui/status/bluetooth.js:251
+#: ../js/ui/status/bluetooth.js:247
msgid "Keyboard Settings"
msgstr "鍵盤設定值"
-#: ../js/ui/status/bluetooth.js:256
+#: ../js/ui/status/bluetooth.js:252
msgid "Mouse Settings"
msgstr "滑鼠設定值"
-#: ../js/ui/status/bluetooth.js:263 ../js/ui/status/volume.js:63
+#: ../js/ui/status/bluetooth.js:259 ../js/ui/status/volume.js:66
msgid "Sound Settings"
msgstr "音效設定值"
-#: ../js/ui/status/bluetooth.js:337 ../js/ui/status/bluetooth.js:371
-#: ../js/ui/status/bluetooth.js:411 ../js/ui/status/bluetooth.js:444
-msgid "Bluetooth Agent"
-msgstr "藍牙代理程式"
-
-#: ../js/ui/status/bluetooth.js:372
+#: ../js/ui/status/bluetooth.js:368
#, c-format
msgid "Authorization request from %s"
msgstr "來自「%s」的驗證要求"
-#: ../js/ui/status/bluetooth.js:378
+#: ../js/ui/status/bluetooth.js:374
#, c-format
msgid "Device %s wants access to the service '%s'"
msgstr "裝置 %s 想要存取服務「%s」"
-#: ../js/ui/status/bluetooth.js:380
+#: ../js/ui/status/bluetooth.js:376
msgid "Always grant access"
msgstr "永遠准許存取"
-#: ../js/ui/status/bluetooth.js:381
+#: ../js/ui/status/bluetooth.js:377
msgid "Grant this time only"
msgstr "只有這次准許"
-#: ../js/ui/status/bluetooth.js:382
+#: ../js/ui/status/bluetooth.js:378
msgid "Reject"
msgstr "拒絕"
-#: ../js/ui/status/bluetooth.js:412
+#: ../js/ui/status/bluetooth.js:408
#, c-format
msgid "Pairing confirmation for %s"
msgstr "%s 的配對確認"
-#: ../js/ui/status/bluetooth.js:418 ../js/ui/status/bluetooth.js:452
+#: ../js/ui/status/bluetooth.js:414 ../js/ui/status/bluetooth.js:448
#, c-format
msgid "Device %s wants to pair with this computer"
msgstr "裝置 %s 想要和這個電腦配對"
-#: ../js/ui/status/bluetooth.js:419
+#: ../js/ui/status/bluetooth.js:415
#, c-format
msgid "Please confirm whether the PIN '%s' matches the one on the device."
msgstr "請確認 PIN「%s」是否和裝置上的相符。"
-#: ../js/ui/status/bluetooth.js:421
+#: ../js/ui/status/bluetooth.js:417
msgid "Matches"
msgstr "相符"
-#: ../js/ui/status/bluetooth.js:422
+#: ../js/ui/status/bluetooth.js:418
msgid "Does not match"
msgstr "不相符"
-#: ../js/ui/status/bluetooth.js:445
+#: ../js/ui/status/bluetooth.js:441
#, c-format
msgid "Pairing request for %s"
msgstr "%s 的配對請求"
-#: ../js/ui/status/bluetooth.js:453
+#: ../js/ui/status/bluetooth.js:449
msgid "Please enter the PIN mentioned on the device."
msgstr "請輸入裝置所提及的 PIN。"
-#: ../js/ui/status/bluetooth.js:469
+#: ../js/ui/status/bluetooth.js:465
msgid "OK"
msgstr "確定"
-#: ../js/ui/status/keyboard.js:78
+#: ../js/ui/status/keyboard.js:73
+msgid "Show Keyboard Layout..."
+msgstr "顯示鍵盤配置…"
+
+#: ../js/ui/status/keyboard.js:76
msgid "Localization Settings"
msgstr "本地化設定值"
+#: ../js/ui/status/network.js:102 ../js/ui/status/network.js:1393
+msgid "<unknown>"
+msgstr "<不明>"
+
+#. Translators: this indicates that wireless or wwan is disabled by hardware killswitch
+#: ../js/ui/status/network.js:295
+msgid "disabled"
+msgstr "已停用"
+
+#: ../js/ui/status/network.js:476
+msgid "connecting..."
+msgstr "連線中…"
+
+#. Translators: this is for network connections that require some kind of key or password
+#: ../js/ui/status/network.js:479
+msgid "authentication required"
+msgstr "要求驗證"
+
+#. Translators: this is for wired network devices that are physically disconnected
+#: ../js/ui/status/network.js:485
+msgid "cable unplugged"
+msgstr "纜線已拔除"
+
+#. Translators: this is for a network device that cannot be activated (for example it
+#. is disabled by rfkill, or it has no coverage
+#: ../js/ui/status/network.js:489
+msgid "unavailable"
+msgstr "無法使用"
+
+#: ../js/ui/status/network.js:491
+msgid "connection failed"
+msgstr "連線失敗"
+
+#. TRANSLATORS: this is the indication that a connection for another logged in user is active,
+#. and we cannot access its settings (including the name)
+#: ../js/ui/status/network.js:571 ../js/ui/status/network.js:1341
+msgid "Connected (private)"
+msgstr "已連線 (私人)"
+
+#: ../js/ui/status/network.js:636
+msgid "Auto Ethernet"
+msgstr "自動使用乙太網路"
+
+#: ../js/ui/status/network.js:697
+msgid "Auto broadband"
+msgstr "自動使用行動寬頻"
+
+#: ../js/ui/status/network.js:700
+msgid "Auto dial-up"
+msgstr "自動使用撥接"
+
+#. TRANSLATORS: this the automatic wireless connection name (including the network name)
+#: ../js/ui/status/network.js:843 ../js/ui/status/network.js:1353
+#, c-format
+msgid "Auto %s"
+msgstr "自動使用 %s"
+
+#: ../js/ui/status/network.js:845
+msgid "Auto bluetooth"
+msgstr "自動使用藍牙"
+
+#: ../js/ui/status/network.js:1355
+msgid "Auto wireless"
+msgstr "自動使用無線網路"
+
+#: ../js/ui/status/network.js:1413
+msgid "More..."
+msgstr "更多…"
+
+#: ../js/ui/status/network.js:1436
+msgid "Enable networking"
+msgstr "啟用網路"
+
+#: ../js/ui/status/network.js:1448
+msgid "Wired"
+msgstr "有線"
+
+#: ../js/ui/status/network.js:1459
+msgid "Wireless"
+msgstr "無線"
+
+#: ../js/ui/status/network.js:1469
+msgid "Mobile broadband"
+msgstr "行動寬頻"
+
+#: ../js/ui/status/network.js:1479
+msgid "VPN Connections"
+msgstr "VPN 連線"
+
+#: ../js/ui/status/network.js:1488
+msgid "Network Settings"
+msgstr "網路設定值"
+
+#: ../js/ui/status/network.js:1783
+#, c-format
+msgid "You're now connected to mobile broadband connection '%s'"
+msgstr "您現在已連線至行動寬頻網路連線「%s」"
+
+#: ../js/ui/status/network.js:1787
+#, c-format
+msgid "You're now connected to wireless network '%s'"
+msgstr "您現在已連線到無線網路「%s」"
+
+#: ../js/ui/status/network.js:1791
+#, c-format
+msgid "You're now connected to wired network '%s'"
+msgstr "您現在已連線至有線網路「%s」"
+
+#: ../js/ui/status/network.js:1795
+#, c-format
+msgid "You're now connected to VPN network '%s'"
+msgstr "您現在已連線至 VPN 網路「%s」"
+
+#: ../js/ui/status/network.js:1800
+#, c-format
+msgid "You're now connected to '%s'"
+msgstr "您現在已連線至「%s」"
+
+#: ../js/ui/status/network.js:1808
+msgid "Connection established"
+msgstr "連線已建立"
+
+#: ../js/ui/status/network.js:1930
+msgid "Networking is disabled"
+msgstr "網路已停用"
+
+#: ../js/ui/status/network.js:2055
+msgid "Network Manager"
+msgstr "網路管理員"
+
#: ../js/ui/status/power.js:85
msgid "Power Settings"
msgstr "電源定值"
-#: ../js/ui/status/power.js:112
+#. 0 is reported when UPower does not have enough data
+#. to estimate battery life
+#: ../js/ui/status/power.js:111
+msgid "Estimating..."
+msgstr "評估中…"
+
+#: ../js/ui/status/power.js:118
#, c-format
msgid "%d hour remaining"
msgid_plural "%d hours remaining"
msgstr[0] "可使用 %d 小時"
#. TRANSLATORS: this is a time string, as in "%d hours %d minutes remaining"
-#: ../js/ui/status/power.js:115
+#: ../js/ui/status/power.js:121
#, c-format
msgid "%d %s %d %s remaining"
msgstr "剩下 %d %s %d %s"
-#: ../js/ui/status/power.js:117
+#: ../js/ui/status/power.js:123
msgid "hour"
msgid_plural "hours"
msgstr[0] "小時"
-#: ../js/ui/status/power.js:117
+#: ../js/ui/status/power.js:123
msgid "minute"
msgid_plural "minutes"
msgstr[0] "分鐘"
-#: ../js/ui/status/power.js:120
+#: ../js/ui/status/power.js:126
#, c-format
msgid "%d minute remaining"
msgid_plural "%d minutes remaining"
msgstr[0] "剩下 %d 分鐘"
-#: ../js/ui/status/power.js:235
+#: ../js/ui/status/power.js:228
msgid "AC adapter"
msgstr "AC 電源"
-#: ../js/ui/status/power.js:237
+#: ../js/ui/status/power.js:230
msgid "Laptop battery"
msgstr "筆記型電腦電池"
-#: ../js/ui/status/power.js:239
+#: ../js/ui/status/power.js:232
msgid "UPS"
msgstr "不斷電系統"
-#: ../js/ui/status/power.js:241
+#: ../js/ui/status/power.js:234
msgid "Monitor"
msgstr "監視器"
-#: ../js/ui/status/power.js:243
+#: ../js/ui/status/power.js:236
msgid "Mouse"
msgstr "滑鼠"
-#: ../js/ui/status/power.js:245
+#: ../js/ui/status/power.js:238
msgid "Keyboard"
msgstr "鍵盤"
-#: ../js/ui/status/power.js:247
+#: ../js/ui/status/power.js:240
msgid "PDA"
msgstr "PDA"
-#: ../js/ui/status/power.js:249
+#: ../js/ui/status/power.js:242
msgid "Cell phone"
msgstr "行動電話"
-#: ../js/ui/status/power.js:251
+#: ../js/ui/status/power.js:244
msgid "Media player"
msgstr "媒體播放器"
-#: ../js/ui/status/power.js:253
+#: ../js/ui/status/power.js:246
msgid "Tablet"
msgstr "手寫板"
-#: ../js/ui/status/power.js:255
+#: ../js/ui/status/power.js:248
msgid "Computer"
msgstr "電腦"
-#: ../js/ui/status/power.js:257 ../src/shell-app-system.c:1012
+#: ../js/ui/status/power.js:250 ../src/shell-app-system.c:1088
msgid "Unknown"
msgstr "不明"
-#: ../js/ui/status/volume.js:42
+#: ../js/ui/status/volume.js:45
msgid "Volume"
msgstr "音量"
-#: ../js/ui/status/volume.js:55
+#: ../js/ui/status/volume.js:58
msgid "Microphone"
msgstr "麥克風"
-#: ../js/ui/telepathyClient.js:563
+#: ../js/ui/telepathyClient.js:332
#, c-format
msgid "%s is online."
msgstr "%s 現在上線。"
-#: ../js/ui/telepathyClient.js:568
+#: ../js/ui/telepathyClient.js:337
#, c-format
msgid "%s is offline."
msgstr "%s 現在離線。"
-#: ../js/ui/telepathyClient.js:571
+#: ../js/ui/telepathyClient.js:340
#, c-format
msgid "%s is away."
msgstr "%s 已離開。"
-#: ../js/ui/telepathyClient.js:574
+#: ../js/ui/telepathyClient.js:343
#, c-format
msgid "%s is busy."
msgstr "%s 正忙碌。"
#. Translators: this is a time format string followed by a date.
#. If applicable, replace %X with a strftime format valid for your
#. locale, without seconds.
-#: ../js/ui/telepathyClient.js:668
+#: ../js/ui/telepathyClient.js:474
#, no-c-format
msgid "Sent at %X on %A"
msgstr "傳送於 %X %A"
-#: ../js/ui/viewSelector.js:26
-msgid "Search your computer"
-msgstr "搜尋您的電腦"
+#. Translators: this is the text displayed
+#. in the search entry when no search is
+#. active; it should not exceed ~30
+#. characters.
+#: ../js/ui/viewSelector.js:122
+msgid "Type to search..."
+msgstr "輸入以搜尋…"
+
+#: ../js/ui/viewSelector.js:142 ../src/shell-util.c:250
+msgid "Search"
+msgstr "搜尋"
-#: ../js/ui/windowAttentionHandler.js:43
+#: ../js/ui/windowAttentionHandler.js:42
#, c-format
msgid "%s has finished starting"
msgstr "%s 已完成啟動"
-#: ../js/ui/windowAttentionHandler.js:45
+#: ../js/ui/windowAttentionHandler.js:44
#, c-format
msgid "'%s' is ready"
msgstr "「%s」已就緒"
-#: ../js/ui/workspacesView.js:243
-msgid ""
-"Can't add a new workspace because maximum workspaces limit has been reached."
-msgstr "不能加入新的工作區，因為已達到最大工作區上限。"
-
-#: ../js/ui/workspacesView.js:259
-msgid "Can't remove the first workspace."
-msgstr "不能移除第一個工作區。"
-
#. translators:
#. * The number of sound outputs on a particular device
-#: ../src/gvc/gvc-mixer-control.c:1094
+#: ../src/gvc/gvc-mixer-control.c:1098
#, c-format
msgid "%u Output"
msgid_plural "%u Outputs"
#. translators:
#. * The number of sound inputs on a particular device
-#: ../src/gvc/gvc-mixer-control.c:1104
+#: ../src/gvc/gvc-mixer-control.c:1108
#, c-format
msgid "%u Input"
msgid_plural "%u Inputs"
msgstr[0] "%u 輸入"
-#: ../src/gvc/gvc-mixer-control.c:1402
+#: ../src/gvc/gvc-mixer-control.c:1406
msgid "System Sounds"
msgstr "系統音效"
-#: ../src/shell-global.c:1365
+#: ../src/main.c:397
+msgid "Print version"
+msgstr "顯示版本"
+
+#: ../src/shell-app.c:454
+#, c-format
+msgid "Failed to launch '%s'"
+msgstr "無法啟動「%s」"
+
+#: ../src/shell-global.c:1395
msgid "Less than a minute ago"
msgstr "少於一分鐘之前"
-#: ../src/shell-global.c:1369
+#: ../src/shell-global.c:1399
#, c-format
msgid "%d minute ago"
msgid_plural "%d minutes ago"
msgstr[0] "%d 分鐘前"
-#: ../src/shell-global.c:1374
+#: ../src/shell-global.c:1404
#, c-format
msgid "%d hour ago"
msgid_plural "%d hours ago"
msgstr[0] "%d 小時前"
-#: ../src/shell-global.c:1379
+#: ../src/shell-global.c:1409
#, c-format
msgid "%d day ago"
msgid_plural "%d days ago"
msgstr[0] "%d 天前"
-#: ../src/shell-global.c:1384
+#: ../src/shell-global.c:1414
#, c-format
msgid "%d week ago"
msgid_plural "%d weeks ago"
msgstr[0] "%d 週前"
+#: ../src/shell-mobile-providers.c:80
+msgid "United Kingdom"
+msgstr "英國"
+
+#: ../src/shell-mobile-providers.c:526
+msgid "Default"
+msgstr "預設值"
+
+#: ../src/shell-polkit-authentication-agent.c:334
+msgid "Authentication dialog was dismissed by the user"
+msgstr "驗證對話盒被使用者取消了"
+
#: ../src/shell-util.c:89
msgid "Home Folder"
msgstr "家目錄"
msgid "File System"
msgstr "檔案系統"
-#: ../src/shell-util.c:250
-msgid "Search"
-msgstr "搜尋"
-
#. Translators: the first string is the name of a gvfs
#. * method, and the second string is a path. For
#. * example, "Trash: some-directory". It means that the
msgid "%1$s: %2$s"
msgstr "%1$s：%2$s"
-#~ msgid "Clock"
-#~ msgstr "時鐘"
-
-#~ msgid "Customize the panel clock"
-#~ msgstr "自訂面板時鐘"
-
-#~ msgid "Custom format of the clock"
-#~ msgstr "自訂時鐘的格式"
-
-#~ msgid "Hour format"
-#~ msgstr "小時格式"
-
-#~ msgid ""
-#~ "If true and format is either \"12-hour\" or \"24-hour\", display seconds "
-#~ "in time."
-#~ msgstr "如果設為 true 且格式為「12-小時」或「24-小時」，在時刻裡顯示秒鐘。"
-
-#~ msgid ""
-#~ "This key specifies the format used by the panel clock when the format key "
-#~ "is set to \"custom\". You can use conversion specifiers understood by "
-#~ "strftime() to obtain a specific format. See the strftime() manual for "
-#~ "more information."
-#~ msgstr ""
-#~ "這個設定鍵是在面板時鐘的「format」設定鍵被設為「custom」時使用的自訂格式。"
-#~ "您可以用可被 strftime() 理解的轉換規範來取得所指定的格式。請查閱 strftime"
-#~ "() 手冊以獲取更多資訊。"
-
-#~ msgid ""
-#~ "This key specifies the hour format used by the panel clock. Possible "
-#~ "values are \"12-hour\", \"24-hour\", \"unix\" and \"custom\". If set to "
-#~ "\"unix\", the clock will display time in seconds since Epoch, i.e. "
-#~ "1970-01-01. If set to \"custom\", the clock will display time according "
-#~ "to the format specified in the custom_format key. Note that if set to "
-#~ "either \"unix\" or \"custom\", the show_date and show_seconds keys are "
-#~ "ignored."
-#~ msgstr ""
-#~ "這個設定值指定了面板時鐘使用的小時格式。可用的數值有「12-hour」、「24-"
-#~ "hour」、「unix」和「custom」。如果設定為「unix」，時鐘會顯示自 Epoch，即 "
-#~ "1970-01-01 以來的秒數。如果設定為「custom」，時鐘會根據 custom_format 設定"
-#~ "鍵顯示時刻。注意不管設為「unix」或「custom」，show_date 和 show_seconds 設"
-#~ "定鍵都會被忽略。"
-
-#~ msgid "Clock Format"
-#~ msgstr "時鐘格式"
-
-#~ msgid "Clock Preferences"
-#~ msgstr "時鐘偏好設定"
-
-#~ msgid "Panel Display"
-#~ msgstr "面板顯示"
-
-#~ msgid "Show seco_nds"
-#~ msgstr "顯示秒數(_N)"
-
-#~ msgid "Show the _date"
-#~ msgstr "顯示日期(_D)"
-
-#~ msgid "_12 hour format"
-#~ msgstr "_12 小時制"
-
-#~ msgid "_24 hour format"
-#~ msgstr "_24 小時制"
-
-#~ msgid "Preferences"
-#~ msgstr "偏好設定"
-
-#~ msgid "Overview workspace view mode"
-#~ msgstr "概覽工作區檢視模式"
-
-#~ msgid ""
-#~ "The selected workspace view mode in the overview. Supported values are "
-#~ "\"single\" and \"grid\"."
-#~ msgstr ""
-#~ "在概覽中選取的工作區檢視模式。支援的數值有「single」(單一)和「grid」(格"
-#~ "線)。"
-
-#~ msgid "Drag here to add favorites"
-#~ msgstr "拖放到這裡加入喜好"
-
-#~ msgid "Find"
-#~ msgstr "尋找"
-
-#~ msgid "Searching..."
-#~ msgstr "搜尋中…"
-
-#~ msgid "No matching results."
-#~ msgstr "沒有相符的結果。"
-
-#~ msgid "Invisible"
-#~ msgstr "隱形"
-
-#~ msgid "ON"
-#~ msgstr "開"
-
-#~ msgid "OFF"
-#~ msgstr "關"
+#~ msgid "No such application"
+#~ msgstr "沒有這個應用程式"
projects / gnome-shell.git / commitdiff